• Home
• Engine
  • Engine Details
  • Engine Specification
  • Engine Bay Components
  • Engine Cut Off
  • Engine Air Filter
  • Changing Spark Plugs
    • Spark Plug Change Bank 1
    • Spark Plug Change Bank 2
  • Bonnet (hood) Release Repair
• Electrical
  • Electrical System
  • Battery
    • Battery Removal
    • Battery Replacement
    • Battery Jump start
  • Radio & Phone
  • Fuse Boxes
    • Engine Bay
    • Passenger Bay
  • Keys & Security
    • Keys & Security
    • Security Systems
    • KeyFob Replacement
    • KeyFob Reprogramming
    • KeyFob Battery Replacement
    • Smart Locking
    • Locking Mode Selection
    • Disarming Security
    • Total Closure
    • Double Locking Doors
• Sensors
  • XType-Sensors
  • O2 Sensors
  • Camshaft Position Sensor(CMP)
• Maintenance
  • Pollen Filter Replacement
  • Windshield Washer Repair
  • Jaguar Maintenance Engine Oil
• Diagnostics
  • OBD II systems
  • Code P1000
  • Code P1111
  • Code P0341
  • Code P1341
  • OBD Diagnostic Monitor
  • “green ECM” Drive
  • Code Database
  • X-Type Instrument-cluster-diagnostics
  • X-Type-ETM-Mode-DTC-Code
  • S-Type Instrument-cluster-diagnostics
• Brakes and Suspension
  • Brakes and Suspension
  • Brake Specifications
  • X-Type Brake Bleeding
  • Changing Rear Pads
  • Changing Rear Disks (Rotors)
• Specifications
  • Lubricants and Fluids
  • Tyres Types
  • Tyre Pressures
  • Wheel Types
  • WheelNut Torques
  • Transmission Specification
  • Engine Specification
  • Kerb Weights
  • Roof Rack
    and Trailer Weights
• Other
  • Jaguar Technical Bullatins
  • Jaguar Parts Suppliers
    • Jaguar Spares Suppliers UK
    • Jaguar Spares Suppliers Poland
    • Jaguar Spares Suppliers USA
    • Jaguar Spares Suppliers Cyprus
    • Jaguar Spares Suppliers Italy
    • Jaguar Spares Suppliers Lithuania
  • Setting the Clock

Rear Brake Disk Replacement

Procedure

Removal of Hand Brake (Emergency Brake) Cable

Assuming that you don't have access to a car lift:-
With the vehicle on a flat stable surface, chock the front wheels and jack the car up at the rear, on the side you wish to change, place the axle stand(s) for security and then remove the road wheel.

With the Rear Disk Brake assembly exposed look at the rear of the caliper and you will see the Hand brake (Emergency Brake) cable and its retaining circlip.

Remove and retain this clip.

Using the Pipe Pliers compress the Hand brake activator until you can remove the cable from its seat.

Push the tip of the cable down and pull the cable back gently to remove the hand brake cable from the caliper assembly.

---