Rear Brake Pad Replacement

Procedure cont..

Removal of Brake Pads

You now need to remove the brake pads, these can be removed as one, in the top part of the caliper assembly,

caliper bolts photo Rear Brake Caliper Bolts

Undo and retain the two 13mm bolts that secure the top caliper assembly. Remove the assembly and brake pads.

The pads are held in by a small spring clip (in Red) that needs to be compressed slightly to release the pads. with the pads removed clean up the caliper area where the pads slide using the wire brush and smear a very light coat of copper slip on the area. Fit the new pads and push well back in the caliper

rear brake pads Brake pad diagram

Removal of Pads and Caliper

Valid XHTML 1.1